How to Update Version 2.0~3.1.0 to Version 3.2.0

1. Diversified coins classification, tracking market anytime.
2. exchange, staking, and buying coins easier
3. Customize the order of coins by your preference
4. Staking FAQ supporting
5. UI design updated

How to Check The Version of Your ELLIPAL Cold Wallet:

1) Go to settings
2) Select "About"
3) See ELLIPAL's version

NOTICE

ELLIPAL Titan users please continue below But ELLIPAL EC01 (first model) users please CLICK below.

1) Prepare a blank MicroSD card. The card must be formatted in FAT32.

On your Windows PC, right click on the SD card and select format. On File system, select "FAT32" and press start. Formatting will be done in seconds.

*Note: Cards bigger than 32GB cannot be FAT32 formatted on Windows PC.
**Note: If card isn't formatted, make sure it is empty and try to update anyways. Although for update to work best, it should be formatted.

2) Download update file here:

Make sure to "Save File". You can also save it directly to the SD card.
If you did not save it directly, copy the update file to the SD card.
If the update file is the only file on the SD card, the preparation is complete.

Please do not change name of the update file or unzip it. Keep it as it is.

3) Insert the SD to the Adapter and Connect it to the ELLIPAL Titan

FOLLOW THESE STEPS CAREFULLY
1 - Turn off the ELLIPAL Titan
2 - With just the Adapter, insert the SD card into the Adapter.
3 - Plug the USB cable to the Adapter (make sure the USB cable is connected to a power source first)
4 - With the SD card in the Adapter and plugged in, connect it to the ELLIPAL Titan while it is off.
5 - Wait until ELLIPAL Titan shows a charging sign and then turn it back on.

*Note: We recommend not using Laptop as power source, use a normal power socket instead.

4) On the ELLIPAL Titan, go to Settings, Select Update

1 - Turn on the ELLIPAL Titan and select settings.
2 - Select update, the ELLIPAL Titan should recognize the update file in the SD card.
3 - It will start extracting the update file automatically, please wait and don't disconnect the adapter. It can take up to 20 minutes.
4 - After extraction is finished, another menu will appear. Select "Start Update".
5 - Wait about 5 minutes and the update is finished.

*Note: The ELLIPAL Titan may act like turning on and off during the process, please don't worry and don't touch it.

UPDATE TUTORIAL VIDEO

*Note: This was shot for the previous version but the steps are the same. Please don't worry.

SUPPORT - Contact info@ellipal.com, will reply within a day.

1) Prepare a blank MicroSD card. The card must be formatted in FAT32.

On your Windows PC, right click on the SD card and select format. On File system, select "FAT32" and press start. Formatting will be done in seconds.

*Note: Cards bigger than 32GB cannot be FAT32 formatted on Windows PC.
**Note: If card isn't formatted, make sure it is empty and try to update anyways. Although for update to work best, it should be formatted.

2) Download update file here:

Make sure to "Save File". You can also save it directly to the SD card.
If you did not save it directly, copy the update file to the SD card.
If the update file is the only file on the SD card, the preparation is complete.

Please do not change name of the update file or unzip it. Keep it as it is.

3) Insert the SD card into the ELLIPAL and restart device.

FOLLOW THESE STEPS CAREFULLY

1 - Select settings.
2 - Select update, the ELLIPAL Titan should recognize the update file in the SD card.
3 - It will start extracting the update file automatically, please wait and don't disconnect the adapter. It can take up to 20 minutes.
4 - After extraction is finished, another menu will appear. Select "Start Update".
5 - Wait about 5 minutes and the update is finished.

*Note: The ELLIPAL Titan may act like turning on and off during the process, please don't worry and don't touch it.

SUPPORT - Contact info@ellipal.com, we will reply within a day.